How are crane lift plans calculated?

How is a crane lift calculated?

Measuring the dimensions of this triangle will allow you to achieve an accurate crane load calculation.

  1. The standard calculation for maximum crane capacity is (r)(hC)/100.
  2. R = Radius between the ground and load.
  3. hC = Lifting height multiplied by the capacity.

How is a crane lift plan prepared?

Lift Planning – 8 Steps for Better Crane & Rigging Operations

  1. Weight of load.
  2. Location of the load’s center of gravity.
  3. Overall maximum dimensions of the load.
  4. Location and quantity of approved lifting lugs / lifting points.

How is a crane load chart calculated?

Back to How to Read a Crane Load Chart

As mentioned above, the left column signifies the lift radius. The top row signifies the length of the boom. Looking at where these rows and columns meet, you’ll see two numbers in each cell. The first number is the crane’s load capacity for the given boom length and lift radius.

How is lifting capacity calculated?

Determining the crane load capacity ensures a safe work environment and allows the project to proceed smoothly. You may need to find the Crane Capacity index for the load chart. To calculate the crane capacity index, use this formula: (Average (radius x max (lifting height x capacity))) / 100.

THIS IS INTERESTING:  How high is high reach forklift?

How are crane outrigger loads calculated?

Simply divide the maximum outrigger load by the allowable ground bearing pressure to determine the pad area you need. Example: Maximum outrigger load = 100,000 lbs. Allowable ground bearing pressure = 3,500 psf. (100,000 lbs / 3,500 psf = 29 ft2 of area).

What is the percentage allowed for lifting according to the capacity of the crane?

When performing a single crane lift, the crane is allowed to lift up to 100 percent of its charted capacity, obviously with caution and only if all parameters are accounted for.

What should a lifting plan include?

The plan should set out clearly the actions involved at each step of the operation and identify the responsibilities of those involved.


  • working under suspended loads.
  • visibility.
  • attaching / detaching and securing loads.
  • environment.
  • location.
  • overturning.
  • proximity hazards.
  • derating.

How do I make a lifting plan?

8 Steps to consider when drafting a lifting plan

  1. Weight of load.
  2. Location of the load’s center of gravity.
  3. Overall maximum dimensions of the load.
  4. Location and quantity of approved lifting lugs or lifting points.
  5. Selection of the appropriate rigging gear to suit lifting points.
  6. Height restriction.
  7. Risk Assessment.

What is a crane plan?

A Crane Lift Plan is required for every crane lift on a Dimeo project – see OSHA Subpart CC for definition of crane. … The Crane Lift Plan may be valid for more than one day, as long as the configuration, location, and parameters used for developing “worst case” condition have not changed.

How do you calculate load capacity?

Calculating Load

  1. Add together the wattage capacity of all general lighting branch circuits.
  2. Add in the wattage rating of all plug-in outlet circuits.
  3. Add in the wattage rating of all permanent appliances (ranges, dryers, water heaters, etc.)
  4. Subtract 10,000.
  5. Multiply this number by . …
  6. Add 10,000.
THIS IS INTERESTING:  How should a loaded lift truck be driven on a ramp?

How much can a 90 ton crane lift?

Matched sizes of main and auxiliary winches provide equal maximum available line pulls of 16,880 lbs (7 656.6 kg) and maximum line speeds of 459 fpm (140 m/min) on 16″ (40.6 cm) root diameter drums.