How do you read a Toyota forklift model number?

The model series is followed by a series of letters, the first of which designates the category of the industrial vehicle. A “B” after the model series designator indicates the forklift has baselegs, which is commonly seen in model numbers for reach trucks and walkie stackers.

How do I tell what year my Toyota forklift is?

To figure out the year your Toyota forklift was manufactured, you’ll need to read the serial number and look for a letter in the last position.

The Hyster lettering system uses the last letter to calculate the year and is as follows:

  1. A = 1957.
  2. B = 1958.
  3. C = 1959.
  4. D = 1960.
  5. X = 1977.
  6. Y = 1978.
  7. Z = 1979.
  8. A = 1980.

How do you read a forklift model number?

There are two different numbering systems, we’ll start with the more common one:

  1. Toyota Forklifts up to 17,500 lbs capacity. …
  2. The second character is a letter. …
  3. The third character tells you about the fuel type or drive type.
  4. The fourth (and sometimes fifth) character tells you more about the truck type.

Where is the model number on a Toyota forklift?

Where to find Toyota Forklift’s Serial Number

  • Toyota Forklift’s Serial Number is written on its nameplate, data plate or data tag. …
  • Forklift Nameplates can be different depending on the model and year of production. …
  • It is usually located on the dashboard.
THIS IS INTERESTING:  Question: How much do tower crane operators make?

Do Toyota forklifts have VIN numbers?

Don’t panic. In many cases, a Toyota forklift’s serial number can be found physically stamped somewhere on its frame. Below is a table of many different models of Toyota forklifts and a set of reference figures.

How can I tell how old my forklift is?

Since 1995, the last character (letter) of a Hyster or Yale forklift serial number designates the year of manufacture. The letters “I,” “O,” and “Q” are not used since they are easily misread.

Where is the serial number on a forklift?

In many cases a forklift’s serial number can be located in the electronics system. It can also be found on its frame as a numerical metal stamp.

How do you read a name plate on a forklift?

Max Lifting Height: The maximum lift height based on load centers. Load Center: This number indicates how far forward from the mast the balancing point of the load is. The further it is from the center, the less weight it can withstand. Back Tilt: The maximum degree of back tilt (tilting the load towards the operator).

What does a forklift capacity chart tell you?

Sometimes referred to as a capacity plate or a forklift nameplate, the forklift data plate includes important information such as weight, fuel type, and forklift load capacity. Associates need to read the data plate during training and before use to help build the culture of safety in your facility.

How do you read a Clark forklift serial number?

The CLARK serial number is stamped into the serial number plate, which is usually located in the operator’s compartment on the hood or the instrument panel. If the serial number plate is missing or illegible, you can find the serial number stamped into the frame.

THIS IS INTERESTING:  What are the parts of a forklift called?

How wide is a forklift?

Standard forklifts generally measure between 4 to 7 ft wide and 8 to 10 ft long. Outdoor or rough terrain forklifts can be greater than 10 ft in length.

What class is a walkie forklift?

Class III equipment includes electric pallet jacks, stackers, and tow tractors. This class of equipment comes in both rider and walk behind (“walkie”) models, perfect for unloading deliveries and moving loads to a staging area where they can be handled by other types of forklifts.