What are the different parts of a forklift?

What are the main parts of forklift?

The three major parts of a lift truck are the body (truck), overhead guard, and hydraulic lift.

What are the things called on a forklift?

Also known as the tynes, the forks on a forklift are used to make direct contact with a load for transport. They are attached to the forklift carriage and are designed to carry a load from the bottom. Forklift forks come in all shapes and sizes. There is a wide variety of fork types available for various applications.

What is the most important part of a forklift?

Cockpit controls are one of the most important parts of a forklift because it allows the operator to control the machine. Therefore the driver can maneuver to avoid pedestrians, avoid dangerous situations, and generally go about performing their day to day job in a safe manner.

What are the 3 main guards on a forklift?

In the manufacturers instructions. Overhead Guard – • Protects the operator from falling objects. Load Backrest – • Protects the operator and stops the load from hitting the mast. Foot Guard – • Protects the operators feet.

THIS IS INTERESTING:  Which is the most common cause of death to crane operators?

What is the Cage called on a forklift?

A forklift work platform is a unit or cage that is integrated (built in), or designed to be supported on the forks of a lift truck. Work platforms that are used to elevate (lift or raise) workers must provide appropriate support and safety measures.

How is a forklift different from a car?

Another major difference between a forklift and a car is in the stability of the vehicle. A forklift has just three points of stability—the front wheels and the center of the rear axle—while a car has four points of stability. … Most forklifts are not designed to handle rough working surfaces like a car.

What does the mast or upright channel do?

Also referred to as an ‘Upright’, the mast is the vertical assembly on the front of the forklift that does the work of raising, lowering, and tilting the load. Most masts are ‘three stage’ meaning there are three channels on each side. The channels are similar in appearance to I-Beams.

When picking up a load the forks should be?

Forks must be at least 2/3 the length of the load. Carefully tilt the mast backward just enough to stabilize the load. Forks on a lift truck are adjustable; spread them to fit the load.

What is the purpose of the carriage on a forklift?

The carriage is important because it is used to mount objects, including forks, the load backrest, and attachments, to the mast chains, allowing loads to go up and down the mast channel.

What are 2 guards fitted to a forklift?

The overhead guard is intended for protection while an operator is within the confines of the seat. Also, operators are prohibited from operating forklifts with their hands, arms, feet, legs or any other body parts around the overhead guard supports or while outside the overhead guard.

THIS IS INTERESTING:  What does LPG mean on a forklift?

What are the two guards in forklift?

Forklift Load Guards and Overhead Guards

To protect forklift operators from this potentially deadly situation most modern forklift masts are equipped with what is known as a ‘load guard’.

What does a foot guard do on a forklift?

An overhead guard is designed to protect the operator from falling objects. Wear a hard hat when appropriate for additional protection. Keep hands and feet within the forklift to avoid danger of falling loads.