What are the parts of a forklift called?

What are the 3 major parts of a forklift?

The three major parts of a lift truck are the body (truck), overhead guard, and hydraulic lift.

What is the cage on a forklift called?

A forklift work platform is a unit or cage that is integrated (built in), or designed to be supported on the forks of a lift truck. Work platforms that are used to elevate (lift or raise) workers must provide appropriate support and safety measures.

What is the most important part of a forklift?

Cockpit controls are one of the most important parts of a forklift because it allows the operator to control the machine. Therefore the driver can maneuver to avoid pedestrians, avoid dangerous situations, and generally go about performing their day to day job in a safe manner.

Whats the back of a forklift called?

The forklift backrest provides the operator another surface to rest the load against and is attached to the carriage. This helps prevent the load from slipping backwards toward the forklift operator during lifting and travel conditions.

THIS IS INTERESTING:  What do tower cranes do?

What is a big forklift called?

The heavy duty forklift—also called a large capacity forklift—combines the functionalities of a warehouse forklift with that of a telehandler. While it can’t reach difficult angles the way that a telehandler can, it is capable of lifting payloads much higher off the ground than a warehouse forklift and heavier loads.

What are the 3 levers on a forklift?

Hydraulic Lift Knobs: Forklift has three basic controls knobs. One that lifts the forks up or down, the second one tilts the forks/blades down or up to secure the load, and the third to move the load side to side.

What does the mast or upright channel do on a forklift?

Also referred to as an ‘Upright’, the mast is the vertical assembly on the front of the forklift that does the work of raising, lowering, and tilting the load. Most masts are ‘three stage’ meaning there are three channels on each side. The channels are similar in appearance to I-Beams.

What are the controls on a forklift?

There are three forklift directional controls: park, drive, and reverse. Directional controls can be mounted to a lift’s steering column. Or, they may be placed in a position where an operator controls them with their foot.

What are the components of a powered industrial truck?

This guide explains the different forklift components, including the purpose of each and how they operate.

  • Forklift Truck Frame. …
  • Counterweight. …
  • Operator Cab. …
  • Power Source. …
  • Forklift Mast. …
  • Forklift Tires. …
  • Forklift Attachments. …
  • Global Sourcing of Forklift Parts – Finding a Quality Component Supplier.
THIS IS INTERESTING:  How much does it cost to lease a forklift?

What is the purpose of the carriage on a forklift?

The carriage is important because it is used to mount objects, including forks, the load backrest, and attachments, to the mast chains, allowing loads to go up and down the mast channel.

What is stability triangle?

What is the stability triangle? Most counterbalanced forklifts have a three-point suspension system, meaning that the truck is supported at the two front wheels and the center of the steer axle. If you imagine all three points connected into a triangle, this is the forklift’s stability triangle.

What are the 7 classes of forklifts?

The 7 Classes of Forklift Trucks

  • Class 1: Electric Motor Rider Trucks.
  • Class 2: Electric Motor Narrow Aisle Trucks.
  • Class 3: Electric Motor Hand or Hand-Rider Trucks.
  • Class 4: Internal Combustion Engine Trucks—Cushion Tires.
  • Class 5: Internal Combustion Engine Trucks—Pneumatic Tires.

What is the most common forklift hazard?

9 Common Forklift Hazards

  1. Improper Operation and Use. …
  2. Load Hazards. …
  3. Insufficient or Incorrect Maintenance. …
  4. Pedestrians. …
  5. Floor Conditions. …
  6. Overhead Obstructions. …
  7. Unit Refueling. …
  8. Attachments.