The nameplates, also called data plates (the two terms are used interchangeably), on a forklift are an important piece of this safety puzzle. They indicate exactly how much load can be put on a forklift taking into account things like truck weight and attachments.
What information is on a forklift nameplate?
Sometimes referred to as a capacity plate or a forklift nameplate, the forklift data plate includes important information such as weight, fuel type, and forklift load capacity. Associates need to read the data plate during training and before use to help build the culture of safety in your facility.
What information is not specified on a forklift nameplate?
Weight of the Forklift – It refers to the weight of the truck without the load. Some nameplates don’t include the weight of the battery. Since battery is heavy, some forklift manufacturers don’t include it to the total truck weight.
What does the capacity plate indicate on a forklift?
To achieve this, forklifts are equipped with a nameplate, also called the data plate or forklift capacity plate. The data plate includes vital information about the forklift, such as its fuel type, weight, and forklift load capacity.
What is the data plate?
The Data Plate is a paper label affixed inside the home and is the size of a standard sheet of paper (8 ½” x 11”). The Data Plate can be found in a kitchen cabinet, an electrical panel, or a bedroom closet. … (a) The name and address of the manufacturing plant in which the manufactured home was manufactured.
What else on a data plate determines how much the truck can pick up?
Using the Data Plate to Determine Your Forklift’s Maximum Capacity. The forks, mast, carriage and any attachment(s), on your forklift each have individual rated capacities. If you have a forklift with a 10,000 lb.
Is a nameplate required on a lift truck?
When is a Forklift Nameplate Required? All forklifts should have a capacity plate, for the safety of the operator. Additionally, a data plate is required when someone has added attachments or altered the original capacity of the forklift.
Do you need a license plate for a forklift?
Appropriate lighting is also needed for public roads, including an amber beacon that lights up (this is for occasions when the forklift will be travelling below 25mph). License plates will also be required, like any other road vehicle.
Do forklifts have number plates?
If you’re plan on operating a forklift truck on a public road, then you’ll need to adhere to certain requirements: … It must be taxed and insured for road use. Registration plates must be displayed on the forklift.
How do you read a forklift plate?
How to Read a Forklift Data Plate
- Forklift Model. The forklift model the rating plate is attached to is clearly stated at the top of the plate. …
- Forklift Serial Number. …
- Year of Manufacture. …
- Nominal Power. …
- Attachment. …
- Truck Weight. …
- Forward Back Tilt. …
- Tyre Information.
What information is on a capacity plate?
This plate indicates the maximum weight capacity and/or the maximum number of people that the boat can carry safely in good weather. You should not exceed either the stated maximum weight capacity or the maximum number of people.
What are five points of the operational inspection key on?
What should an operator inspect during the visual pre-use check?
- General condition and cleanliness.
- Floor – clear of objects that could cause an incident.
- Overhead – no obstructions.
- Nearby objects to avoid as you drive away.
- Fire extinguisher – present and charged.
What must you check before using an attachment on a forklift?
The following checks must be made before using an attachment on a forklift:
- The attachment must suit the truck you are fitting it to, and must be suitable for the type of load you are lifting.
- It must be properly attached to the forklift with a suitable locking device.
How do you read forklift forks?
Carriage plate height (C) = Forks (tines) are mounted on a forklift carriage. Fork drop (D) = The fork drop is measure from the top of the lower hook to the floor. Length of fork (L) – measure from the end of the tip to the shank. Length can be given in mm or inches, common lengths are 48” inch, 72” inch and 96” inch.
What is the safest position for your forklift when you are carrying a load up a ramp onto a trailer?
When traveling with a load, the load should point up the incline, regardless of direction of travel. Going up the incline: Drive forward. Forks pointed upgrade.