What is the purpose of an overhead guard on a forklift?

An overhead guard is designed to protect the operator from falling objects. Wear a hard hat when appropriate for additional protection. Keep hands and feet within the forklift to avoid danger of falling loads.

What does overhead guard mean?

Overhead guard means a framework fitted to a tractor over the head of a riding operator to protect the operator from falling objects.

What are the 3 guards on a forklift?

Overhead Guard – • Protects the operator from falling objects. Load Backrest – • Protects the operator and stops the load from hitting the mast. Foot Guard – • Protects the operators feet.

What are the two guards in forklift?

Forklift Load Guards and Overhead Guards

To protect forklift operators from this potentially deadly situation most modern forklift masts are equipped with what is known as a ‘load guard’.

THIS IS INTERESTING:  What is the purpose of a front end loader?

What is the guard called on a forklift?

The overhead guard is a critical feature of a forklift’s safety. The overhead guard’s purpose is to help protect the operator should something fall onto the forklift cab.

What should you always do before reversing the forklift?

Reversing The Forklift

  1. When reversing the forklift, always do so slowly. …
  2. Be sure to sound your horn before you reverse to alert pedestrians and other vehicular traffic of your presence. …
  3. When manoeuvring down a ramp, you should always do so in reverse.

What should an employer do before you start forklift HRW operations?

Before you can apply for a national licence to perform high risk work to operate a forklift, a Registered Training Organisation (RTO) must assess your training, skills and knowledge using the relevant national ‘assessment instrument’ under realistic workplace conditions.

What is the purpose of the backrest on a forklift?

Load backrests play an important role in keeping your drivers safe. They prevent your forklift’s load from falling toward the driver. It features a steel grid above the forks and attaches to the sides of the forklift carriage with heavy-duty, steel framing.

What is counterbalance forklift?

Counterbalance Forklift Trucks

The counterbalance forklift features two forks at the front and has the ability to drive up close to a load to pick it up and move it. The name comes from the counterweight in the rear of the vehicle. This is to compensate for the heavy load being lifted at the front.

What action should you take if you find that data plate is missing from forklift?

Your order picking forklift and any attachments you use with it will have a data plate. If the data plate on the forklift is missing or unreadable, do not use the order picking forklift. Talk with your workmates. They might be able to give you information about the job or make you aware of hazards you don’t know about.

THIS IS INTERESTING:  What are the parts of a forklift called?

When a laden lift truck is being driven on a ramp incline the load should face?

When driving a forklift on a ramp, OSHA CFR 1910.178 sets these standards: Grades shall be ascended or descended slowly. When driving on a grade that exceeds 10%, loaded trucks must drive with the load facing upward, regardless of whether a truck is traveling up or down a ramp.

When moving a load with the forklift what is the safe height for the load?

68. When you are moving the forklift, what is a safe height for the load? -Axle height or as low as possible to the ground without scraping.

What are the controls on a forklift?

There are three forklift directional controls: park, drive, and reverse. Directional controls can be mounted to a lift’s steering column. Or, they may be placed in a position where an operator controls them with their foot.

What is the safest position for your forklift when you are carrying a load up a ramp onto a trailer?

When traveling with a load, the load should point up the incline, regardless of direction of travel. Going up the incline: Drive forward. Forks pointed upgrade.

How do you lower the fuel pressure on a forklift?

y

  1. No smoking!
  2. Shut off cylinder valve before turning off forklift to reduce pressure in the fuel line.
  3. Make sure pressure relief valve points straight up when replacing the tank.