What is the top of a forklift called?

The forklift mast is the raised vertical support that allows loads to be raised and lowered. For most forklifts, the mast is designed toward the front of a forklift and directly in the forklift operator’s line of vision.

What are the parts of a forklift called?

Common Forklift Parts: The Terminology Primer

  • Cab: The cab is the central part of the forklift. …
  • Carriage: The carriage mounts the forks to the mast and serves as a support structure for the forklift.
  • Mast: …
  • Load Backrest: …
  • Forks: …
  • Overhead Guard: …
  • Tires: …
  • Counterweight:

What are the 3 major parts of a forklift?

The three major parts of a lift truck are the body (truck), overhead guard, and hydraulic lift.

What are the arms of a forklift called?

Tynes. Sometime referred to as the “fork” or the “forks,” tynes are one of the most vital parts of a forklift. These are the arms found on the load carriage. They enter a pallet to lift a load, or the load is placed directly on the forks.

What is the mast on a forklift?

The forklift’s mast, or upright, is the portion of the forklift that lifts, lowers, and positions the loads manipulated by the forks. Each type of mast presents its own set of advantages for different applications depending on their height and stacking requirements.

THIS IS INTERESTING:  You asked: How much does the average forklift weight?

What is the Cage called on a forklift?

A forklift work platform is a unit or cage that is integrated (built in), or designed to be supported on the forks of a lift truck. Work platforms that are used to elevate (lift or raise) workers must provide appropriate support and safety measures.

What does the mast or upright channel do?

Also referred to as an ‘Upright’, the mast is the vertical assembly on the front of the forklift that does the work of raising, lowering, and tilting the load. Most masts are ‘three stage’ meaning there are three channels on each side. The channels are similar in appearance to I-Beams.

What are tines on a forklift?

Forklift forks, also known as tines or blades, are used to lift and carry loads. They are an integral part of the forklift and ensuring you are using the correct ones and that they are in good condition is essential to both the safety of personnel, but also the forklift and the load.

How would you describe a forklift?

Forklift is a small industrial vehicle, having a power operated forked platform attached at the front that can be raised and lowered for insertion under a cargo to lift or move it. Forklifts serve the needs of various industries including warehouses and other large storage facilities.

What are the 3 levers on a forklift?

Hydraulic Lift Knobs: Forklift has three basic controls knobs. One that lifts the forks up or down, the second one tilts the forks/blades down or up to secure the load, and the third to move the load side to side.

THIS IS INTERESTING:  What is the forklift on the back of a truck called?

What is a pantograph on a forklift?

Axon Forklift: Pantograph

Pantograph is put into operation whenever Telescopic Forks or Reach Forks can be used. The knife forks of this attachment can pick up loads with very little bottom clearance and stacked double deep for transportation. Pantograph is one of forklift parts.

What is duplex mast?

(Also known as: Duplex Upright or Two-Stage Free-Lift Mast). This type of mast has a hydraulic cylinder located in the center of the mast assembly that helps push loads upwards, enabling the load to rise while the mast itself remains stationary.

What are the 3 common mast types?

There are three common types: Single Stage (simplex mast) 2-Stage (duplex mast) 3-Stage (triplex mast)