The rear end of the forklift swings in a circle around the front wheels. Make sure there’s room for the rear end to swing out when making turns. And if you’re moving a load in reverse, don’t forget to allow room for the load to swing too. Most forklifts have a three-point suspension system.
When you turn the rear of your forklift swings wide?
One of the most important differences is the way forklifts steer. Unlike autos, they steer from the read axle while their front wheels pivot. The massive counterweight at the rear of the lift truck swings wide when the vehicle turns.
What does rear end swing mean?
Forklifts are rounded on the back to allow for tighter corners and to reduce the impact damage. This fast unexpected movement is called the “rear end swing” and it is the mysterious way the paint moves from the forklift.
What is rear end steering forklift?
Rear-wheel steering helps balance the load of the front. One of the main jobs of the front wheels is to support the weight of your load. As the load gets heavier, the front wheels take on more strain.
Do forklifts steer from the rear?
In a car or truck, the front wheels steer the vehicle. However, a forklift has the steering wheels in the rear end of the forklift so it can swing in a circle around the front wheels that support most of the load. … Rear steering makes it difficult to stop a forklift quickly or swerve and still maintain control.
What is tail swing on a forklift?
Unlike automobiles, forklifts steer from the rear. This design creates a forklift tail swing during turns, moving the rear of the forklift to the opposite side of the turn. … For pedestrians, the stakes are higher if they are caught between the forklift tail swing and another object.
What are the three points of a forklift that make up the stability triangle?
There’s the weight of the load itself and the counterbalance weight located in the engine. This weight is distributed on three points—the front two wheels and the pivot point on the back axel—forming an imaginary “triangle.” This is the stability triangle of the forklift.
What is the safest position for your forklift when you are carrying a load up a ramp onto a trailer?
When traveling with a load, the load should point up the incline, regardless of direction of travel. Going up the incline: Drive forward. Forks pointed upgrade.
When should an operator tilt the load back on the mast?
The mast must be carefully tilted backward to stabilize the load. Ensure the load is secured before moving. Slowly move the truck to 20 to 30 cm (8 to 12 inches) away from the stack.
Where is the pivot point on a forklift?
The Forklift Fulcrum
The fulcrum is the central pivot point of a seesaw. The front axle is the fulcrum of the forklift where the counterweight and the load find balance.
What is the combined center of gravity on a forklift?
Center of gravity is the point at which an object’s weight is evenly distributed and the object is balanced. The stability triangle is the area between the two front wheels and the middle of the rear axle. To stay upright, the forklift’s combined center of gravity must stay within the stability triangle.
What is the danger caused by rear end swing?
Drive slowly when turning and always be conscious of rear-end swing. Rear end swing is dangerous to pedestrians as the tail of the forklift can swing very rapidly creating the potential to crush pedestrians.
Are forklifts front or rear wheel drive?
Forklifts are front wheel drive. The front wheels drive while the rear wheels steer.
What will happen if the combined center of gravity?
What will happen if the ” Combined Center of Gravity” moves outside the stability triangle? The lift truck will tip over in the same direction. As the load center increases the capacity increases.