What replaced the John Deere 790 tractor?
The 3005 was introduced to replace the 790.
How many horse is a John Deere 790?
What we know about the John Deere 790 tractor is that it has a 3 cylinder Diesel Engine that produces 30 horsepower. Shown left is a picture of the John Deere 790 tractor. The John Deere 790 tractor has a category 1 three point hitch and its pto is rated at 24 hp.
What backhoe fits John Deere 790?
John Deere 790 Attachments
John Deere 7 Backhoe | |
---|---|
Backhoe type: | John Deere 7 Backhoe |
Loading height: | 70 inches 177 cm |
Bucket force: | 1,945 lbs 882 kg |
Dipperstick force: | 1,095 lbs 496 kg |
How much does a John Deere 790 excavator weight?
Operating Specifications
Alternator Supplied Amperage | 42 A |
---|---|
Hydraulic System Fluid Capacity | 79.3 gal (300 l) |
Hydraulic System Relief Valve Pressure | 3770 psi |
Operating Voltage | 24 V |
Operating Weight | 48440 lbs (21,972 kg) |
Is a John Deere 790 a 4 wheel drive?
This tractor has a 30hp engine, is four wheel drive, has 819hrs, and also has a john deere 419 loader with hook and pin quick attach.
Can you tell the year of a John Deere tractor by the serial number?
Identify the letter and numbers in positions nine through 12 in a 17-symbol VIN. In order, these identify the security code, calender year of manufacture, transmission code, and wheel or track designation. The calender year of manufacture will be denoted by an A for 2010, B for 2011 and so on.
How much does a 790 tractor weigh?
John Deere 790
Dimensions & Tires | |
---|---|
Wheelbase: | 60.4 inches 153 cm |
Weight: | 1930 to 2105 pounds |
Front tire: | 6.00-12 |
Rear tire: | 12.4-16 |
How much oil does a John Deere 790 hold?
John Deere 790 Engine
Engine Detail | |
---|---|
Yanmar 3TNE84 | |
Rated RPM: | 2600 |
Starter volts: | 12 |
Oil capacity: | 4.2 qts 4.0 L |
How much horsepower does a John Deere s790 have?
Engine
Engine type | John Deere PowerTech PSS engine 13.5 L 824 cu in. |
---|---|
Rated power | 405 kW 543 hp |
Maximum power | |
Power boost @ rated speed | 37 kW 50 hp |
Fuel capacity | 1,250 L 330 gal. |
How much does a 300e Loader weigh?
Loader
Base weight | 306.4 kg |
---|---|
Leveling configuration | |
Bucket used | Materials – 1550 mm |
Bucket weight | 93 kg 205 lb |
Lift capacity at full height | Measured at pivot (U) 539 kg 1186 lb Measured at 500 mm ahead of pivot (V) 384 kg 845 lb |