While the original manual would have specified a single grade motor oil with a viscosity rating dependent on the expected ambient temperature range, most folks these days use a diesel rated 15W-40 oil. As for the pressure, 40 psi should be fine.
What kind of oil goes in a Ford 2000 tractor?
Best choice is to use an oil of type UTF (Universal Tractor Fluid) or UTTO (Universal Tractor Transmission Oil). You use these types both for transmission and rear axle (hydraulics). Most brands have them. By the way, you need 12.5 Litres for the trans and 24 Litres for the rear axle.
What kind of oil does a Ford tractor use?
The majority of guys on Ford tractor boards use Delo, Rotella or a generic equivalent of 15W40 diesel oil.
How much motor oil does a Ford 2000 tractor hold?
Ford 2000 Engine
|Oil capacity:||8 qts 7.6 L|
What years did they make the Ford 2000 tractor?
The Ford 2000 tractor was originally produced between 1962 and 1965 out of Highland Park, Michigan. When sourcing parts, keep in mind that the four-cylinder Ford 2000 was very similar to the 601 Workmaster Series put out by the same company.
How much oil does an 8N Ford Tractor hold?
Ford 8N Engine
|Oil capacity:||6 qts 5.7 L|
What oil goes in a 8N transmission?
For its 8N, Ford specified mild EP gear conforming to Ford specs M4864A (SAE 80) for temperatures below freezing and M4864B (SAE 90) for temperatures above freezing. This conforms to modern-day API gear oil designation of GL3.
What are the different weights of oil?
The 11 viscosity grades are 0W, 5W, 10W, 15W, 20W, 25W, 20, 30, 40, 50, and 60. In the United States, these numbers are often referred to as the “weight” of a motor oil, and single-grade motor oils are often called “straight-weight” oils.
How many horsepower does a 2000 Ford tractor have?
|Ford 2000 Power|
|Engine:||37.4 hp 27.9 kW|
|Drawbar (claimed):||28 hp 20.9 kW|
|PTO (claimed):||31 hp 23.1 kW|
|Drawbar (tested):||28.10 hp 21.0 kW|
Does Ford 2000 have live PTO?
Looking at tractordata.com, it looks like all Ford 2000’s should have live pto via 2-stage clutch. The tractor I looked at would not engage the PTO until the tires were moving. Could it be that this tractor did not have the two-stage clutch, or is it just out of adjustment, or completly broken?
What is the firing order on a Ford 2000 tractor?
The correct firing order is 1-2-4-3 if the rotor turns clockwise. If the rotor turns counter-clockwise, the firing order is 1-3-4-2.
How much can a Ford 2000 tractor pull?
Ford 2000 Tests
|Nebraska Tractor Test 1053|
|Diesel 6-speed 2WD September 29 – October 10, 1970 Link: Nebraska Tractor Test 1053 file|
|Fuel use:||2.0 gal/hour 7.6 l/hour|
|Gear 3 used for power test.|
|Max pull:||4,452 lbs 2019 kg|
Is a Ford Jubilee a good tractor?
While the Jubilee is not as full-featured as a modern tractor, it has enough bells and whistles to accomplish all sorts of chores on a small farm. These tractors are very reliable but any tractor this old will need replacement parts every now and then. This is where the Ford Jubilee really shines.
What was the last year of Ford tractors?
Ford was the only automotive firm to sell cars, trucks and tractors simultaneously from 1917 to 1928. For a decade between 1928 and 1939, Ford of the U.S. left the tractor business.