Why is my mower leaving a strip of grass?

A strip of uncut grass left in the middle of mowing rows could signal that your lawnmower’s blades are unbalanced or that one or both of them was installed the wrong way. Lawnmower blades are beveled and specifically designed to attach in a certain fashion.

Why does my lawn mower leave tracks?

The straw-colored wheel track patterns occur when drought-stressed turf is mowed — essentially bruising the turf leaf blades. Unfortunately, this bruising kills the leaf blade, often all the way to the ground. Fortunately, the actual grass plants aren’t dead. … Ascochyta is a fungus that lives on the leaf blade.

Why does my Husqvarna mower leave a strip of grass?

The major reasons for leaving strips of grass are not having the front of the deck 1/8-1/4 inch higher than the rear and mowing at a speed that is too fast.

Why is my mower not cutting evenly?

Uneven cutting is wavy or smooth troughs in the lawn surface. Uneven cutting is usually caused by mower deck damage or misadjustment.

Uneven Cutting.

Blades are damaged Replace the blades
Deck is clogged with grass clippings Clean out the deck
THIS IS INTERESTING:  How long do commercial mowers last?

Why does my Honda mower leave a strip of grass?

Improperly sharpened (or NOT sharpened) blades is usually the cause of the uncut strip.

How do I stop getting lines when I mow?

Just mow around it or make it a focal point.

  1. Make sure to keep your lines straight. Keep your eye on the area beyond the obstacle.
  2. When you turn around to cut in the opposite direction, mow over any unwanted turn marks to keep the stripes looking even.

How do you mow without leaving lines?

If you notice lines in your lawn after you mow it, you should check to ensure that your blades are sufficiently sharp for cutting. To make sure that your blades are suitable, you should sharpen them between once and twice per season. Oh, and by the way, blunt blades can cause other problems, too.

Why is one side of my mower deck lower than the other?

If the deck on your lawn tractor is lower on one side than the other, the result is an uneven cut. Leveling your tractor’s deck periodically smooths out your lawn. It only takes a few minutes and just a couple of common tools to level your lawn tractor deck.

Why do Honda mowers have 2 blades?

Our blades are designed specifically for our mowers, using advanced engineering to lift each blade of grass and achieve a perfect cut. Twin blades produce finer clippings. That means less clumping and a better look for your lawn.