Your question: What is a Category 1 tractor?

You’ll widely find these on tractors offering between 20 and 50 horsepower. The top link pin measures 3/4 inch in diameter, while the two lift arm pins are slightly thicker at 7/8 inch. The spacing between the lift arms is approximately 26 inches. You may also find references to “limited” Category 1 hitches.

What is the difference between Category 1 and 2 tractors?

Category 1 Hitch For tractors with 20 to 50 horsepower. Category 2 Hitch For tractors with 50 to 90 horsepower. Long days can seem even longer when you aren’t comfortable.

What is considered a Category 1 tractor?

It’s typically reserved for the smallest garden tractors that typically can have add-on three-point hitches put on to them, not stuff that typically comes as standard equipment. Category 1 is very, very common and typically you’re gonna see Category 1 on tractors under about 50 horsepower.

What is a Category 3 tractor?

What are the 3-point hitch categories?

Category Tractor Power Lower hitch spacing
1 20-45 HP 28 in (710 mm)
2 40-100 HP 34 in (860 mm)
3 80-225 HP 40 in (1,000 mm)
4 More than 180 HP 48 in (1,200 mm)

What is a Category 1 tractor hitch?

Category 1

You’ll widely find these on tractors offering between 20 and 50 horsepower. The top link pin measures 3/4 inch in diameter, while the two lift arm pins are slightly thicker at 7/8 inch. The spacing between the lift arms is approximately 26 inches. You may also find references to “limited” Category 1 hitches.

THIS IS INTERESTING:  Can I jump start my John Deere with my car?

Can Cat 2 tractors use CAT 1?

As 56FordGuy said, you have to be careful using cat 1 implements behind a cat 2 tractor. They typically just are not built to take the stresses that a cat 2 tractor can put on them.

What category is a subcompact tractor?

Category 1 hitches are generally found on subcompact and compact tractors from 20 hp up to about 50 hp. The top link pin measures 3/4″ in diameter and the lift arm holes are 7/8″. The spacing between the lift arms is approximately 26″ while the mast height is 15″.

What is a three-point tractor hitch?

The three-point hitch (British English: three-point linkage) is a widely used type of hitch for attaching ploughs and other implements to an agricultural or industrial tractor. … This gives the tractor more usable traction than it would otherwise have, given the same power, weight, and fuel consumption.

What are the dimensions of a category 1 hitch?

Three-point hitch specifications

Category Hitch pin size
17 mm (5/8″) 17 mm (5/8″)
1 19 mm (3/4″) 22.4 mm (7/8″)
2 25.5 mm (1″) 28.7 mm (1 1/8″)
3 31.75 mm (1 1/4″) 37.4 mm (1 7/16″)

Does a 3 point hitch float?

Most 3 point arms float naturally. One can grab a side and lift it from a lowered position. there is only gravity and the weight of implement / lift arm to lower it.