How often should you grease your excavator?

While greasing daily is ideal, at minimum, you should be greasing every eight hours of operation. However, some lubrication points have different greasing intervals, so it’s important to refer to the OMM. Make sure to grease all the grease points around the machine.

How often do you grease an excavator?

Your compact excavator’s pins and bushings need to be greased every day that it’s on the job. A good rule of thumb is to use one to three shots of grease. Too little grease will cause accelerated wear because it won’t provide enough lubrication.

Do you grease excavator tracks?

To grease excavator tracks, remove the cover plate that shields your grease fitting and adjuster valve. If you want to increase tension, use your grease gun and add grease. To loosen excavator tracks, bleed the adjuster valve until you’re satisfied with the results.

How often should Excavators be serviced?

JCB recommends routine maintenance checks at 10 hours (daily), 50 hours (weekly), 500 hours (every six months), 1,000 hours (yearly) and 2,000 hours (every two years). The most comprehensive and time-consuming maintenance still takes place at longer intervals, while faster, simpler maintenance is required more often.

THIS IS INTERESTING:  How much is a dry hire excavator?

How often should equipment be greased?

While greasing daily is ideal, at minimum, you should be greasing every eight hours of operation. However, some lubrication points have different greasing intervals, so it’s important to refer to the OMM. Make sure to grease all the grease points around the machine.

How often should a loader be greased?

Weekly maintenance

Weekly or roughly every 100 hours, the machine should be thoroughly greased at the pivot points, bushing and bearing.

How do I maintain my excavator?

Quick Tips to help Maintain your Excavator Undercarriage

  1. Keep it clean. It goes without saying that clean tracks will wear at a slower rate than ones packed with abrasive dirt and sand. …
  2. Keep tracks properly adjusted. …
  3. Take regular measurements. …
  4. Undertake regular inspections. …
  5. Operate smoothly. …
  6. Plan your job.

How do you store an excavator?

5 maintenance tips to keep excavators in top condition

  1. Drain the water separator every morning. …
  2. Check track tension once a week. …
  3. Don’t touch the air filter until the light goes on in the cab. …
  4. Always buy a replacement filter from Volvo. …
  5. Don’t mix other coolants with Volvo coolant.

What are the maintenance of excavator?

Check wear plates on bucket. Grease all pins and bushings daily. Check controls and seat belt in cab and make sure they are operating properly. Turn on machine and check controls, windshield wipers, seatbelt and air conditioning system.

How many hours is too much on an excavator?

Lifespan of a Mini Excavator

A high quality, well-maintained mini excavator (aka, compact excavator) has a maximum lifespan of about 10,000 hours. Heavy use and poor maintenance can quickly reduce that to about 8,000 hours.

THIS IS INTERESTING:  How much does a tow truck driver make in Miami?

Can you over grease equipment?

Overgreasing can lead to high operating temperatures, collapsed seals and in the case of greased electric motors, energy loss and failures.

Which grease is best?

These are the three best greases from the current market for your vehicle

  • Valvoline SynPower Synthetic Automotive Grease. This grease is composed of a lithium-based complex thickened in oil, along with premium grade additives. …
  • Lucas Oil 10301 Heavy Duty Grease. …
  • Maxima 80916 Waterproof Grease.